Please note:
Program description
This 720-hour program, consisting of three 240-hour levels, is designed to provide the apprentice with theoretical knowledge of all aspects of the heavy duty equipment technician trade. Additionally, the program provides the practical training necessary to complement the apprentice's on-the-job training experience. The curriculum for the first level of this program is identical to Level 1 for apprentices registered in the following trades: Truck and Coach Technician, Agricultural Equipment Technician, and Powered Lift Truck Technician. Upon completion, this program confers the graduate an Ontario College Certificate titled Heavy Equipment Techniques - Apprenticeship.
Program details
Fees & payment
- Fees are set by the Ministry of Labour, Immigration, Training and Skills Development as per the Offer of Classroom Training.
- Books, safety equipment, tools, and parking fees are additional. For details, visit Orientation & support.
- Applicants are registered on a first-come, first-served basis.
Awards & scholarships
Many program-specific awards are administered by individual programs. Students should speak to their faculty or program coordinators about additional awards available in their program specific areas.
Courses
Level 1
Course details
Trade Practices
TRCK1010
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Fluid Power Systems
TRCK1020
In this course, students will demonstrate a basic knowledge of fluid power fundamentals, components, graphic symbols, and operating principles; in addition to fluids, filters, conductors, connectors and creating a proper maintenance schedule.
- Hours: 21
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Engine Systems
TRCK1030
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Electrical Systems
TRCK1040
In this course the student will demonstrate a fundamental knowledge of the principles of electrical theory and laws, and the use of electrical test equipment. Additionally, the apprentice will trace, test and repair electrical circuits and components; demonstrating knowledge of electromagnetic devices, test and service batteries
- Hours: 49
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Fuel Systems
TRCK1050
- Hours: 21
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Drive Train Systems
TRCK1060
- Hours: 35
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Wheel End Assemblies and Brake Systems
TRCK1075
- Hours: 28
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Level 2
Course details
Trade Practices II
MOTV2110
This course is designed to enable the student to perform heating and cutting activities following manufacturers’ recommendations, government regulations, and safe work practices. The student is able to describe heating and ventilation system testing and repair procedures following manufacturers’ recommendations, government regulations, and safe work practices. The student is able to describe air conditioning system testing and repair procedures following manufacturers’ recommendations, government regulations, and safe work practices. The student is able to identify unsafe/faulty operator protection devices following manufacturers’ recommended practices and government regulations.
- Hours: 21
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Fluid Power Systems II
MOTV2125
This course is designed to enable the student to interpret schematics and perform pressure, force, and area calculations related to hydraulics. The student is able to describe the service procedures of hydraulic fluids, reservoirs, and conditioners following manufacturers’ recommendations. The student is able to replace hydraulic lines and fittings following manufacturers’ recommendations. The student is able to recommend repairs of hydraulic control valves following manufacturers’ recommendations. The student is able to recommend repairs of a hydraulic pump following manufacturers’ recommendations.
- Hours: 56
- Credits: 4
- Pre-Requisites:
- CoRequisites:
Engine Systems II
MOTV2130
This course is designed to enable the apprentice to describe testing procedures for combustion chamber condition following manufacturers’ recommendations and safe work practices. The apprentice is able to describe the testing and servicing procedures for cylinder heads, valve trains, and related components following manufacturers’ recommendations and safe work practices. The apprentice is able to describe the testing and servicing procedures for cooling systems components and coolants following manufacturers’ recommendations and safe work practices. The apprentice is able to describe the testing and servicing of lubricating system, components, and lubricants following manufacturers’ recommendations and safe work practices. The apprentice is able to describe the testing and servicing procedures for air induction and exhaust systems following manufacturers’ recommendations.
- Hours: 35
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Electrical Systems II
MOTV2140
This course is designed to enable the apprentice to describe the principles of electricity following accepted scientific principles. The apprentice is able to trace current flow through circuits with the use of an electrical schematic. In addition, the apprentice is able to recommend repair of a cranking system and also test basic electronic components following manufacturers’ recommendations.
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Fuel Systems II
MOTV2150
This course is designed to enable the apprentice to describe the testing procedures for mechanical governor systems, in addition to the diesel in-line fuel injection pump system service procedures following manufacturers’ recommendations and government policies. The apprentice will also be able to follow the timing procedures for distributor pump systems as per manufacturers’ recommendations, describe the diesel unit injection system repair procedures, along with the testing procedures for pressure time fuel injection systems, and will be able to identify injector replacement precautions all while following manufacturers’ recommendations.
- Hours: 35
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Drive Train Systems II
MOTV2160
- Hours: 28
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Steering, Tires & Brake Systems
MOTV2170
- Hours: 21
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Level 3
Course details
Heavy Duty Equipment Technician Examination Preparation
MOTV0020
This course is designed to assist apprentices with their preparation to write the Certificate of Qualification (CofQ) exam for the Heavy Duty Equipment Technician trade. It will consist of a review of the materials taught during the three levels of in-school training. Common areas of difficulty will be determined and additional in-depth review of these areas will be provided. This program is sponsored totally by the MLITSD and has no grade assigned.
- Hours: 30
- Credits: 0
- Pre-Requisites:
- CoRequisites:
Trade Practices III
MOTV3000
- Hours: 21
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Fluid Power III
MOTV3010
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Engine Systems III
MOTV3020
- Hours: 28
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Electrical/Electronic Systems III
MOTV3035
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Fuel Systems III
MOTV3040
In this course the apprentice will demonstrate an understanding and competency with fuel systems. The areas of study will include diesel fuel injection partial-authority engine management, diesel fuel injection full-authority engine management and diesel engine emission systems.
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Drive Train Systems III
MOTV3050
- Hours: 35
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Suspension and Steering Systems
MOTV3060
- Hours: 35
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Program outcomes
- Identify basic heavy duty equipment power system problems by using critical thinking skills and strategies and by applying fundamental knowledge of heavy duty equipment operation, components and their interrelationships.
- Identify, inspect, and test basic heavy duty equipment engine components and systems in compliance with manufacturers’ recommendations.
- Identify, inspect, and test basic heavy duty equipment electrical and electronic components and systems in compliance with manufacturers’ recommendations.
- Identify, inspect and test basic power train components and systems in compliance with manufacturers’ recommendations.
- Identify, inspect, test and maintain basic suspension, steering, and brake components and systems in compliance with manufacturers’ recommendations.
- Disassemble and assemble heavy duty equipment components to required specifications by applying workshop skills and knowledge of basic shop practices.
- Use a variety of test equipment and schematics to assess basic heavy duty equipment fuel systems, and subsystems.
- Apply basic knowledge of hydraulics and pneumatics to the testing and inspection of basic heavy duty equipment systems and subsystems.
- Use information technology and computer skills to access data concerning repair procedures and manufacturers’ updates.
- Prepare logs, records, and documentation to appropriate standards.
- Apply business practices and communication skills to improve customer service.
- Develop and use personal and professional strategies and plans to improve professional growth, job performance, and work relationships.
- Complete all assigned work in compliance with occupational, health, safety, and environmental law; established policies and procedures; codes and regulations; and in accordance with ethical principles.
- Perform soldering operations, welding and cutting, using oxy-fuel and GMAW according to industry standards and manufacturers recommendations.
Program handbook
Program handbookGraduate opportunities
Heavy duty equipment technicians perform preventative maintenance, diagnose faults, and repair the systems of heavy equipment.
For more details on related occupations, job market information and career opportunities, see the Government of Canada website: https://www.jobbank.gc.ca/home
Program device & software requirements
This program requires you to have a device that meets certain specifications. For most students, this cost is in addition to the tuition & fees listed above.
view device requirements#ThinkConestoga
Follow us on social media and see what life is like as a Condor.