Bachelor of Engineering - Sustainable Design Engineering

Select start date and campus

Applying as a Canadian applicant

Domestic students should apply online or by phone at 1-888-892-2228.

Campus tours

Campus tours are one of the best ways to experience Conestoga. During this time, we are offering online guided tours to show you all Conestoga has to offer.

Book your tour

Virtual tours

If you can't make an on-campus tour or attend one of our events, the virtual tour is a great way to visit us.

View our Virtual tour

Courses - August 2025

Level 1

Course details

Chemistry
CHEM72005

Description: This course provides students with the opportunity to perform a number of chemistry experiments increasing their practical knowledge, investigation skills, chemical processes in industrial settings and safety awareness. Topics covered may include: chemical reactions, acids and bases, Newton's Law of Cooling, reduction and oxidation, polymerization and synthesis of acetylene.

Hours: 56
Credits: 3
Pre-Requisites:
CoRequisites:
Estimated required text and/or learning resource costs: Not available at this time.

Conestoga 101
CON0101

Description: This self-directed course focuses on introducing new students to the supports, services, and opportunities available at Conestoga College. By the end of this course, students will understand the academic expectations of the Conestoga learning environment, as well as the supports available to ensure their academic success. Students will also be able to identify on-campus services that support their health and wellness, and explore ways to get actively involved in the Conestoga community through co-curricular learning opportunities.

Hours: 1
Credits: 0
Pre-Requisites:
CoRequisites:
Estimated required text and/or learning resource costs: No cost.

Project 1A - Building Science
DSGN71140

Description: In this course the student will be introduced to the application of Building design and construction processes through a small building (house). Given the Owner’s Project Requirements (OPR), the student will complete a simple building shell layout using basic Building Science principles. Drawings of the building will be produced using AutoCAD and Revit. Spatial requirements for systems and equipment will be considered.

Hours: 84
Credits: 4
Pre-Requisites:
CoRequisites:
Estimated required text and/or learning resource costs: Not available at this time.

Introduction to Sustainable Engineering Design
ENGG71000

Description:

In this course the three pillars of sustainability will be defined. Students will examine what sustainability means from scientific, economic, and societal perspectives. Through lectures, case studies and group discussions, students will lay a foundation for defining what sustainability is and how humans are affecting the earth's natural systems.

Hours: 42
Credits: 3
Pre-Requisites:
CoRequisites:
Estimated required text and/or learning resource costs: Not available at this time.

Foundation Module (Sustainable Design Eng)
FND71110

Description:

The Foundation Module is a two-week preparatory session designed to ensure all students possess the required fundamental skills to be successful within the program. This module provides the first exposure to Project Based Learning, and to learning through alternatives to traditional teaching practices.

Hours: 42
Credits: 3
Pre-Requisites:
CoRequisites:
Estimated required text and/or learning resource costs: Not available at this time.

Mathematics for Engineering I
MATH70000

Description:

The topics covered in this course include: methods of solving a set of linear equations, matrix algebra and matrix determinant, linear transformations; spatial vectors.

Hours: 70
Credits: 5
Pre-Requisites:
CoRequisites:
Estimated required text and/or learning resource costs: Not available at this time.

Physics for Engineering I
PHYS70000

Description:

Topics in this physics course include fundamental mechanics: scientific units and accuracy of measurement, kinematics, dynamics, energy and momentum (linear and rotational), centroid, moment of inertia, static equilibrium of particles and rigid bodies, and simple harmonic motion.

Hours: 70
Credits: 5
Pre-Requisites:
CoRequisites:
Estimated required text and/or learning resource costs: Not available at this time.

Introduction to Natural Sciences
SCIE71000

Description: This course examines several areas in the natural sciences including astronomy, earth sciences and biology. In the astronomy section, students acquire a basic understanding of the universe, its origins and composition, and the inter-relationships between galaxies, stars and planets, including those in our own solar system. Cosmology and current ideas regarding space and time are also discussed. In the geology section of the course, students acquire a basic understanding of various geological principles including Earth’s structure and materials, Earth’s history, Earth’s processes and the impact of natural disasters Current research into the prediction of natural disasters and the study and use of Earth’s materials are also discussed In the biology section, students examine various sub-disciplines of biology, thereby gaining an understanding of the nature of life and its complex interactions with the biotic and abiotic environments. The impact of and preventative measures for spread of infectious diseases, advancements in DNA technology and the health of our biosphere are also discussed. . Research methods are also discussed and the impact of current research in the Natural sciences in contemporary society is assessed. Throughout the course, students develop critical thinking and analytical reasoning skills.

Hours: 56
Credits: 4
Pre-Requisites:
CoRequisites:
Estimated required text and/or learning resource costs: Not available at this time.

Group Dynamics
SOC71500

Description: This course will focus on comprehensive theoretical understanding of group process, personal skill development and application through intensive team work. These skills are of critical importance in both professional and social settings. Through guided exploration and application of theoretical paradigms and practical strategies, students will achieve the necessary skills to succeed in and lead effective teams. The course consists in an intensive experiential approach – learning by doing – enabling participants to become effective, practiced team members with experience applying skills necessary for leadership, analysis and evaluation, problem solving, and conflict management. Individual and team activities enhance participants’ skills to work with a variety of personalities in diverse situations, and to effectively assume various professional roles within a team.

Hours: 42
Credits: 3
Pre-Requisites:
CoRequisites:
Estimated required text and/or learning resource costs: $72.00

Level 2

Course details

Project 1b
DSGN71155

Description:

In this course, students will build upon the residential building design developed in Project 1A by incorporating sustainable design principles. The focus will be on reducing the building’s environmental impact through material selection, embodied carbon analysis, energy efficiency strategies, and LEED Green Building Standard applications. Students will use Revit, Carbon Insight, and other sustainability assessment tools to evaluate and improve their designs.

Hours: 70
Credits: 5
Pre-Requisites:
CoRequisites:
Estimated required text and/or learning resource costs: Not available at this time.

Electrical and Electronic Foundations
ELEC72030

Description:

This course introduces the basic electrical and electronic components, circuits and network theorems. Topics include: electrical power sources, passive and active circuit elements using AC and DC and DC circuit analysis using different network theorems and computer aided tools.

Hours: 56
Credits: 4
Pre-Requisites: PHYS70000 OR PHYS71020
CoRequisites:
Estimated required text and/or learning resource costs: Not available at this time.

Scientific and Technical Communications
ENGL71200

Description: Documents that are written for scientific or technical purposes are written in a very precise and specific way that does not permit variations in interpretation. This course will prepare students to communicate scientific and technical information concisely and accurately using appropriate formats and graphic support. Students will study technical communication theory/ practice and apply the knowledge to creating, critiquing, and presenting technical documents. An oral presentation will emphasize the clear and concise communication of technical details and the use of appropriate visual support for technical information.

Hours: 42
Credits: 3
Pre-Requisites:
CoRequisites:
Estimated required text and/or learning resource costs: No cost.

Mathematics for Engineering II
MATH70010

Description:

This course is the second foundational Mathematics course for Engineering.

Hours: 70
Credits: 5
Pre-Requisites:
CoRequisites:
Estimated required text and/or learning resource costs: Not available at this time.

Physics for Engineering II
PHYS70010

Description:

This is the second fundamental Physics for Engineering course

Hours: 70
Credits: 5
Pre-Requisites:
CoRequisites:
Estimated required text and/or learning resource costs: Not available at this time.

Programming Principles
PROG71985

Description: This course introduces software design and implementation using the C language. Topics include: algorithm design, modular code design, programming style, functions, arrays, pointers strings, data structures, and file I/O. An emphasis will be placed on proper design to produce reliable, robust and maintainable software.

Hours: 56
Credits: 4
Pre-Requisites:
CoRequisites:
Estimated required text and/or learning resource costs: $88.93

Level 3

Course details

Co-op and Career Preparation
CEPR71050

Description: This series of modules prepares degree level students for job searching for their co-op work terms with the guidance of a Co-op Advisor. Students will examine the co-operative education policies and procedures and will learn the expectations, rules, and regulations that apply in the workplace concerning social, organizational, ethical, and safety issues while deepening their awareness of self-reflective practices. Students will critically reflect on their skills, attitudes, and expectations and evaluate available opportunities in the workplace. Successful completion of these modules is a requirement for co-op eligibility.

Hours: 14
Credits: 1
Pre-Requisites:
CoRequisites:
Estimated required text and/or learning resource costs: No cost.

Advanced Calculus
MATH71570

Description: Topics in this course include: conic sections, parameterized curves, and vectors in the plane and in space; vector-valued functions and space curves; integration in vector fields; multivariable functions, partial derivatives, gradient vectors, and multiple integrals. Power series, Taylor and Maclaurin series are also presented. Application of mathematical concepts to various engineering fields is also emphasized.

Hours: 56
Credits: 4
Pre-Requisites: MATH70010 OR MATH71560 OR MATH71561
CoRequisites:
Estimated required text and/or learning resource costs: No cost.

Statics and Strength of Materials
MATR71025

Description: The topics in this course include: static equilibrium of particles and rigid bodies; static equilibrium analysis of structures and structural components; stress-strain concepts and relations; force, elastic stress-strain and deformation analyses of axially loaded components and circular shafts or tubes under torsion; shear force and bending moment diagrams of beam; two- and three- dimensional force vector analysis; trusses and frames analysis: method of joint, method of section; centroid, moments of inertia and polar moment of inertia.

Hours: 56
Credits: 4
Pre-Requisites: PHYS70010 OR PHYS71095
CoRequisites:
Estimated required text and/or learning resource costs: $81.70

Fluid Mechanics
MECH72125

Description: Topics in this course include: fluid properties, fluid statics; conservation principles of mass, momentum and energy; dimensional analysis in fluid mechanics; and internal and external flows.

Hours: 56
Credits: 4
Pre-Requisites: MATH70010 OR MATH71570 AND PHYS70000 OR PHYS71095
CoRequisites:
Estimated required text and/or learning resource costs: $217.50

Thermodynamics
MECH73115

Description: Topics in this course include: the fundamental elements of classical macroscopic thermodynamics and heat transfer; basic concepts; properties of pure substances; laws of thermodynamics; flow and non-flow thermodynamic processes; mixtures of gases; power cycles; refrigeration cycles; thermodynamics of Gas Flow; combustion processes; heat transfer: conduction, convection, and radiation.

Hours: 56
Credits: 3
Pre-Requisites: CHEM72000 OR CHEM72005 AND MATH70010 OR MATH71570 OR MATH72005 OR MATH72300
CoRequisites:
Estimated required text and/or learning resource costs: $44.25

Electives: Major - Program Option 1
Student must pass 1 Course(s), selected in the Student Portal from available course options

View Program Option Electives

Please note that all courses may not be offered in all semesters. Go to your student portal for full timetabling details under "My Courses".

Heating and Cooling Load Calculations and Psychrometrics
BES71000

Description: In this course the student will be introduced to basic heat transfer calculations and energy analysis of moist air. Manual calculations of heat loss through building envelopes and heat gain will be carried out. Ventilation requirements will be discussed and calculated. Solar radiation effects on buildings will be analyzed.

Hours: 56
Credits: 3
Pre-Requisites:
CoRequisites:
Estimated resource cost: No resources required

Soil Mechanics
ENVR72050

Description:

This course is an introduction to soil mechanics. Topics include: soil classification systems, mass-volume relationships, stress-strain characteristics under loading, ground water flow, consolidation and shear strength. Through lectures and laboratories learners will develop the foundational skills to assess subsurface conditions as they pertain to civil engineering projects.

Hours: 56
Credits: 4
Pre-Requisites: MATR71025
CoRequisites:
Estimated resource cost: No resources required

Electives: Major - Program Option 2
Student must pass 1 Course(s), selected in the Student Portal from available course options

View Program Option Electives

Please note that all courses may not be offered in all semesters. Go to your student portal for full timetabling details under "My Courses".

Project 2a - Architectural Engineering Design Fundamentals
ARCH72040

Description:

This is a project-based course focused on the fundamentals of architectural engineering. Students will design a single-family residence or small commercial building using appropriate codes and industry-based software.

Hours: 56
Credits: 4
Pre-Requisites:
CoRequisites:
Estimated resource cost: No resources required

Project 2a - Civil Engineering Fundamentals
CIVL72000

Description:

This is a project-based course focused on fundamental aspects of civil engineering. Students will begin to study structures and fluids and show their application to a framing project and a watermain design project. They will demonstrate the use appropriate software.

Hours: 56
Credits: 4
Pre-Requisites:
CoRequisites:
Estimated resource cost: No resources required

Level 4

Course details

Numerical Methods
MATH73210

Description: The topics covered in this course include: the effects of errors and approximations on numerical results, applied knowledge of solving equations numerically and techniques of curve fitting, data modeling, numerical differentiation and numerical integration.

Hours: 28
Credits: 2
Pre-Requisites: MATH70000 OR MATH71000 AND MATH71560 OR MATH71561 OR MATH71570
CoRequisites:
Estimated required text and/or learning resource costs: $116.15

Structural Analysis
MATR72010

Description:

This course introduces methods of analysis for structures having a high degree of static indeterminacy such as continuous beams, trusses, plane frames, grids and multi-storey frames.

Hours: 42
Credits: 3
Pre-Requisites: MATH71561 OR MATH71570 AND MATR71025 OR MATR72050
CoRequisites:
Estimated required text and/or learning resource costs: Not available at this time.

Strength of Materials II
MATR72050

Description: The topics covered in this course include: beams in elastic bending; buckling of columns; thin-walled pressure vessel; combined stresses: stress and strain transformations, principal stresses and principal strains; failure criteria: maximum normal stress, maximum shear stress and maximum distortion energy theories; and virtual work analysis of pinned jointed truss.

Hours: 42
Credits: 3
Pre-Requisites: MATR71025
CoRequisites:
Estimated required text and/or learning resource costs: No cost.

Electives: Major - Program Option 3
Student must pass 1 Course(s), selected in the Student Portal from available course options

View Program Option Electives

Please note that all courses may not be offered in all semesters. Go to your student portal for full timetabling details under "My Courses".

Construction Materials for Building Design & Construction
CONS72000

Description:

The course covers building construction systems in terms of materials, methods and technology. It reviews foundation types, structural systems of precast and pre-stressed concrete, steel and timber framing; building envelope: with more emphasis placed on exterior cladding and insulation materials, building science, curtain walls, window walls, glazing, roofing, mechanical, electrical, plumbing and sprinkler systems. In addition, it examines selection of materials, systems and methods in terms of their efficiency, life cycle costing and cost effectiveness.

Hours: 56
Credits: 4
Pre-Requisites:
CoRequisites:
Estimated resource cost: No resources required

Construction Materials for Land Development
MATR72000

Description:

This course introduces the student to the properties of concrete, asphalt and other construction materials and their applications in land development. Tests on fine and course aggregates are performed to determine their suitability in concrete and asphalt mix designs. The relationship between the curing time and the compressive strength of concrete is determined by means of destructive testing on concrete cylinders.

Hours: 56
Credits: 4
Pre-Requisites:
CoRequisites:
Estimated resource cost: No resources required

Electives: Major - Program Option 4
Student must pass 1 Course(s), selected in the Student Portal from available course options

View Program Option Electives

Please note that all courses may not be offered in all semesters. Go to your student portal for full timetabling details under "My Courses".

Green Rating Systems and Sustainable Goals
ENGG72000

Description:

This course will allow students to develop their knowledge of various green rating systems and sustainable goals that are common in the building industry. Rating systems that will be examined will include: LEED, Green Globes, net zero, Passive House and low carbon design.

Hours: 56
Credits: 4
Pre-Requisites:
CoRequisites:
Estimated resource cost: No resources required

Open Channel Flow
ENVR72060

Description:

This course develops theoretical and practical skills necessary to design pipe and open flow systems. Topics that directly related to Water Resources and Water Structures in Civil Engineering are covered. Subjects such as orifices and restrictives, open channel flow and design, flow control and flow measurement in open channels and culvert design will be examined.

Hours: 56
Credits: 4
Pre-Requisites: MECH72125 OR MECH72126
CoRequisites:
Estimated resource cost: No resources required

Electives: Major - Program Option 5
Student must pass 1 Course(s), selected in the Student Portal from available course options

View Program Option Electives

Please note that all courses may not be offered in all semesters. Go to your student portal for full timetabling details under "My Courses".

Project 2b - Building Science Fundamentals
BES72010

Description:

The Building Science Fundamentals course uses best practices to teach you the principles of heat transfer, psychrometrics, moisture management and air movement as they apply in building envelope assembly. This course helps you develop the skills you need to compare the performance of various materials, construction types, and building designs in terms of energy efficiency and costs.

Hours: 56
Credits: 4
Pre-Requisites:
CoRequisites:
Estimated resource cost: No resources required

Project 2b - Environmental Design Fundamentals
ENVR72070

Description:

This is a project-based course focused on the fundamental aspects of environmental engineering. Students will use their knowledge to design and model open channel water flows using; irrigation canals, laboratory flumes, spillway chutes, drops, culverts, roadside gutters, etc. while mitigating environmental disruption and using appropriate regulations and standards.

Hours: 56
Credits: 4
Pre-Requisites: CIVL72000
CoRequisites:
Estimated resource cost: No resources required

Level 5

Course details

Co-op Work Term I (Bachelor Sustainable Design Eng)
COOP73120

Description:

The first co-op work term will provide students with college-approved work experience within a sustainable design engineering environment. Through this course students will be provided an opportunity to: build skills (physical and procedural skills including accuracy, precision, and efficiency); assist in the acquisition of knowledge in and application of knowledge gained in the academic setting (concepts and terminology in a discipline or field of study); develop critical, creative, and dialogical thinking (improved thinking and reasoning processes); cultivate problem solving and decision-making abilities (mental strategies for finding solutions and making choices); explore attitudes, feelings, and perspectives (awareness of attitudes, biases, and other perspectives, ability to collaborate); practice professional judgment (sound judgment and appropriate professional action in complex, context-dependent situations); and reflect on experience (self-discovery and personal growth from real-world experience).

Hours: 420
Credits: 14
Pre-Requisites: CEPR71050
CoRequisites:
Estimated required text and/or learning resource costs: Not available at this time.

Level 6

Course details

Co-op Work Term II (Bachelor Sustainable Design Eng)
COOP74160

Description:

The co-op work term will provide students with college-approved work experience within a sustainable design engineering environment. Students will be provided an opportunity to build skills (physical and procedural skills including accuracy, precision, and efficiency); assist in the acquisition of knowledge in and application of knowledge gained in the academic setting (concepts and terminology in a discipline or field of study); develop critical, creative, and dialogical thinking (improved thinking and reasoning processes); cultivate problem solving and decision-making abilities (mental strategies for finding solutions and making choices); explore attitudes, feelings, and perspectives (awareness of attitudes, biases, and other perspectives, ability to collaborate); practice professional judgment (sound judgment and appropriate professional action in complex, context-dependent situations); and reflect on experience (self- discovery and personal growth from real-world experience).

Hours: 420
Credits: 14
Pre-Requisites:
CoRequisites:
Estimated required text and/or learning resource costs: Not available at this time.

Level 7

Course details

Differential Equations
MATH73010

Description:

Topics covered in this course include: methods of solving first-order differential equations; second-order linear equations with constant coefficients; higher-order linear equations with constant coefficients; systems of first order differential equations; Laplace transform and discontinuous forcing functions. The relationship between differential equations and linear algebra is emphasized.

Hours: 42
Credits: 3
Pre-Requisites: MATH70000 OR MATH71000 AND MATH71570
CoRequisites:
Estimated required text and/or learning resource costs: Not available at this time.

Sustainable Materials
MATR73010

Description:

The topics in this course include: determining what criteria makes a material sustainable; discussing greenwashing in the industry; demonstrating tools used to assess the sustainability of materials in the construction industry.

Hours: 56
Credits: 4
Pre-Requisites:
CoRequisites:
Estimated required text and/or learning resource costs: Not available at this time.

Science, Technology and Society
SOC71045

Description: This theme-based course aims to provide an understanding of the historical, social, economic and political context within which scientific and technological advancement takes place. Innovation is a social product, often an expression of current ideas or a response to a social need. Conversely, technological and scientific innovation can transform the structure of society, its value system, and institutions. Through a series of lectures and student-centered activities, this course will assess the impact, benefits, consequences and implications of the inter-relationship between science, technology and society.

Hours: 42
Credits: 3
Pre-Requisites:
CoRequisites:
Estimated required text and/or learning resource costs: No cost.

Electives: Program Option - Technical Elective
Student must pass 1 Course(s), selected in the Student Portal from available course options

View Program Option Electives

Please note that all courses may not be offered in all semesters. Go to your student portal for full timetabling details under "My Courses".

Advanced Building Performance and Automation
ARCH74060

Description: In this course, the students will learn how computerized control systems are designed to work in buildings. The principal systems covered will be: heating, ventilating and air-conditioning control; lighting systems-switching and dimming; elevators-optimum scheduling; security-access control and monitoring; and fire safety-air flow controls, alarms and sprinklers. Smart building automation topics are included in this course.

Hours: 42
Credits: 3
Pre-Requisites:
CoRequisites:
Estimated resource cost: No resources required

Artificial Intelligence
CNTR73150

Description:

Topics in this course include: solving problems by searching (uninformed search algorithms, informed search algorithms, nonclassical search) and learning (regression and classification with linear models and artificial neural networks). The students will develop computer programs for solving a given problem using different searching methods and for simple character recognition using neural networks.

Hours: 42
Credits: 3
Pre-Requisites: PROG71985 OR PROG72355
CoRequisites:
Estimated resource cost: No resources required

Finite Element Analysis
DSGN74045

Description: This course is designed to introduce the fundamental concepts of finite element modelling and enable students to use a general-purpose finite element analysis software, ANSYS, to solve engineering problems mainly in stress and dynamic analysis of structures. The theory of finite element is presented including element derivation and solution procedures. Topics covered in this course include: stress, strains, displacement of solid bodies due to combined loadings, transformation of stress, principal stresses and the failure theorem (e.g., maximum distortion energy criterion “von Mises criterion”, “Tresca”); the mathematical foundations for the one and two dimensional finite-element method; introduction to the weighted residual and energy methods used in finite element analysis, analysis of structural components and structures using the FE software ANSYS; model verification and interpretation of graphical and numerical FEA results.

Hours: 42
Credits: 3
Pre-Requisites: MATR72050
CoRequisites:
Estimated resource cost: No resources required

Value Engineering and Life Cycle Costing
ENGG74100

Description: The course focuses on providing techniques, concepts and principles of value engineering during concept and design phases of construction project. Topics covered include: the concept of function, cost, worth and value, characteristics of function analysis and FAST diagram. Life cycle costing methods and simple multi-attribute rating techniques are also covered. The course will be supported with case studies and students will conduct value engineering study in team environment.

Hours: 42
Credits: 3
Pre-Requisites:
CoRequisites:
Estimated resource cost: No resources required

Operations Management
OPER73240

Description: The term operations management refers to the direction and control of the processes that transform inputs into finished goods and services. This function is essential to systems producing goods and services in both profit and non-profit organizations. The goal of the course is to help students become effective managers in today’s competitive, global environment. The course will examine operations as a competitive weapon, demand forecasting, supply-chain management, aggregate planning, inventory systems, just-in-time systems and material requirements planning.

Hours: 42
Credits: 3
Pre-Requisites:
CoRequisites:
Estimated resource cost: No resources required

Electives: Major - Program Option 6
Student must pass 1 Course(s), selected in the Student Portal from available course options

View Program Option Electives

Please note that all courses may not be offered in all semesters. Go to your student portal for full timetabling details under "My Courses".

Ecological and Biological Activity
BIOL73060

Description:

This course studies the built environment and its effects on living organisms and their restoration. Topics covered will include: river and lake ecosystems, river geomorphology, lake processes, and terrestrial processes.

Hours: 42
Credits: 3
Pre-Requisites:
CoRequisites:
Estimated resource cost: No resources required

Structural Design
CIVL73000

Description:

This course will introduce students to structural systems including systems that carry gravity and lateral loads in buildings; structural design concepts; the analysis and design of concrete beams and one-way slabs; the design of steel beams and tension members; and the comparison of steel and concrete framing systems.

Hours: 42
Credits: 3
Pre-Requisites: MATR72050
CoRequisites:
Estimated resource cost: No resources required

Electives: Major - Program Option 7
Student must pass 1 Course(s), selected in the Student Portal from available course options

View Program Option Electives

Please note that all courses may not be offered in all semesters. Go to your student portal for full timetabling details under "My Courses".

Sustainable Building Operations
ENGG73010

Description:

This course will cover topics relating to operating a building sustainably. Topics will include: using building metrics to improve performance; improving the building envelope for a healthier building; reducing water use; employing strategies for more efficient and cost-effective heating and cooling systems; managing lighting to minimize energy use while maintaining lighting quality; maintaining indoor air quality for tenant comfort; and utilizing building automation controls (BAS) to minimize energy usage.

Hours: 54
Credits: 4
Pre-Requisites: BES71000
CoRequisites:
Estimated resource cost: No resources required

Geotechnology and Foundation Engineering
ENVR73110

Description:

This course builds upon the concepts covered in soil mechanics and on topics of earth pressure and stability. The course will cover topics such as designing retaining walls, shallow foundations, and slope stability

Hours: 56
Credits: 4
Pre-Requisites:
CoRequisites:
Estimated resource cost: No resources required

Electives: Major - Program Option 8
Student must pass 1 Course(s), selected in the Student Portal from available course options

View Program Option Electives

Please note that all courses may not be offered in all semesters. Go to your student portal for full timetabling details under "My Courses".

Project 3a - Hydrology and Stormwater
ENVR73120

Description:

This course develops student knowledge and application of storm water management as it relates to the land development process. Major topics developed in this course include concepts and definitions relating to stormwater management such as design storms, rainfall intensities, infiltration, storm water runoff, review of how the hydrologic cycle effects the land development process, hydrograph, quantity control, quality control, water balance, treatment trains and introduction to computer simulation models. The student will design storm water management facilities for the development of a commercial and residential property.

Hours: 56
Credits: 4
Pre-Requisites:
CoRequisites:
Estimated resource cost: No resources required

Project 3a - Integrated Design Process
MGMT73020

Description:

This course will explain the Integrated Design Process (IDP); discuss and contrast IDP to conventional design practice; teach students the techniques to start applying IDP to design projects; and provide additional useful sources of IDP tools and information.

Hours: 56
Credits: 4
Pre-Requisites:
CoRequisites:
Estimated resource cost: No resources required

Level 8

Course details

Estimating for Sustainable Solutions
ENGG73040

Description:

Managing the cost of a project is a core skill required for engineers. Students will analyze parameters and support sustainable solutions. The topics covered in this course include: estimating costs associated with incorporating sustainable solutions into construction projects; assessing performance based tradeoffs; and incorporating performance improvements into designs.

Hours: 42
Credits: 3
Pre-Requisites:
CoRequisites:
Estimated required text and/or learning resource costs: Not available at this time.

Project 3b - Sustainable Design Feasibility
ENGG73050

Description:

Topics in this course include: evaluating the merits of sustainable design including societal, environmental and economic benefits; cost-benefit analysis of sustainable building systems and energy performance measures; life cycle costing of sustainable projects; effectively communicating these evaluations and reports to project stakeholders.

Hours: 56
Credits: 4
Pre-Requisites:
CoRequisites:
Estimated required text and/or learning resource costs: Not available at this time.

Probability and Statistics
MATH74005

Description:

Topics in this course include: data summary and graphical display; data analysis methods; random variables and probability distributions; statistical inference: point estimation, confidence intervals, and hypothesis testing; empirical model building; and design of engineering experiments.

Hours: 42
Credits: 3
Pre-Requisites: MATH71570
CoRequisites:
Estimated required text and/or learning resource costs: Not available at this time.

Electives: Interdisciplinary
Student must pass 1 Course(s), selected in the Student Portal from available course options
Interdisciplinary Elective Details

Electives: Major - Program Option 9
Student must pass 1 Course(s), selected in the Student Portal from available course options

View Program Option Electives

Please note that all courses may not be offered in all semesters. Go to your student portal for full timetabling details under "My Courses".

Ontario Building Code with Energy Emphasis
CODE73000

Description:

This course will focus on the Ontario Building Code's Supplementary Standard SB-10 Energy Efficiency Requirements and Supplementary Standard SB-12 Energy Efficiency for Housing. Students will be taught how to follow the prescriptive energy requirements and the performance energy requirements.

Hours: 56
Credits: 4
Pre-Requisites:
CoRequisites:
Estimated resource cost: No resources required

Environmental Site Assessment and Remediation
ENVR73130

Description:

This course covers concepts on Phase One and Phase Two Environmental Site Assessments; filing a Record of Site Condition; regulatory requirements; assessment methodologies; remediation for various site conditions; and an introduction to risk assessment.

Hours: 56
Credits: 4
Pre-Requisites:
CoRequisites:
Estimated resource cost: No resources required

Electives: Major - Program Option 10
Student must pass 1 Course(s), selected in the Student Portal from available course options

View Program Option Electives

Please note that all courses may not be offered in all semesters. Go to your student portal for full timetabling details under "My Courses".

Transportation Engineering
ENGG73020

Description:

Topics in this course include: travel forecasting; evaluating, designing and managing transportation systems; integration of trails and bike paths into transportation systems; using tool to evaluate transportation investments; and discussing transportation impacts due to winter road operations.

Hours: 42
Credits: 3
Pre-Requisites:
CoRequisites:
Estimated resource cost: No resources required

Building Envelope & HVAC Systems
ENGG73030

Description:

This course provides students with an introduction to HVAC systems and design. It reinforces building science fundamentals for the evaluation, design, and construction of durable and energy efficient buildings. Using the concepts learned, various building envelope systems and assemblies will be analyzed along with their impact on HVAC systems; best-practices for assembly design and detailing fundamentals for the building envelope; and HVAC design will be covered.

Hours: 42
Credits: 3
Pre-Requisites:
CoRequisites:
Estimated resource cost: No resources required

Electives: Major - Program Option 11
Student must pass 1 Course(s), selected in the Student Portal from available course options

View Program Option Electives

Please note that all courses may not be offered in all semesters. Go to your student portal for full timetabling details under "My Courses".

Water Supply and Wastewater
ENVR73140

Description:

This course covers topics relating to water supply and wastewater in urban systems. Topics such as estimating municipal water supply quantities, water distribution, and water treatment processing;  estimating the quantities of domestic sewage flows, layout planning of waste water collection systems, design and construction of sewers, sewage treatment processes, disposal of effluent and sludge.

Hours: 56
Credits: 4
Pre-Requisites:
CoRequisites:
Estimated resource cost: No resources required

Renewable Energy Design
ERGY73000

Description:

This course will provide students with the opportunity to investigate various forms of renewable energy, design a renewable energy system and apply it to a building project. Topics covered in this course include: electrical basics needed for renewable energy design; modelling and/or designing solar energy (photo-voltaics) systems, electrical power from wind energy, electrical power from water, including wave energy, tidal energy, micro-hydro.

Hours: 56
Credits: 4
Pre-Requisites:
CoRequisites:
Estimated resource cost: No resources required

Level 9

Course details

Co-op Work Term III (Sustainable Design Eng)
COOP74170

Description:

Hours: 420
Credits: 14
Pre-Requisites:
CoRequisites:
Estimated required text and/or learning resource costs: Not available at this time.

Level 10

Course details

Economics for Engineers
ECON74000

Description:

Engineering Economics is a requirement of the Canadian Engineering Accreditation Board. Marketing and price determination. Project cash flows. Assessment of alternative investments/equipment/projects and determination of output decisions. Depreciation of equipment. Factors affecting decisions: Taxation, Inflation. Assessment and management of uncertainties and risk.

Hours: 42
Credits: 3
Pre-Requisites:
CoRequisites:
Estimated required text and/or learning resource costs: Not available at this time.

Civil Infrastructure and Rehabilitation
ENGG74040

Description:

This course deals with the assessment, rehabilitation and/or strengthening of civil infrastructure. Topics include damage mechanisms, instrumentation and non-destructive test methods, conventional repair techniques, innovative repair and strengthening techniques with composites. Case studies provide students with the opportunity to learn from field applications.

Hours: 42
Credits: 3
Pre-Requisites:
CoRequisites:
Estimated required text and/or learning resource costs: Not available at this time.

Law, Ethics and Professional Practice
LAW74600

Description: In this course students will study the role of law in society, the Canadian legal system, law of torts, contract law, protection of intellectual property, forms of business organizations such as sole proprietorships, partnerships and corporations, foundations of ethical reasoning, engineering Codes of Ethics, professional engineering Acts, ethical dilemmas encountered in the engineering profession, ethical issues related to the protection of the environment, risks associated with engineering activities, protection of public interests, regulation of the engineering profession in Canada, and disciplinary powers delegated by the governments to engineering associations.

Hours: 42
Credits: 3
Pre-Requisites:
CoRequisites:
Estimated required text and/or learning resource costs: $304.90

Construction Management & Safety
MGMT73030

Description:

This course introduces the student to the administration of construction contracts including the management of relations among the client, the consultants and the general contractor. Topics include specifications, quality control, project management, and construction project management. This course also introduces the basic health and safety issues typically involved in construction.

Hours: 42
Credits: 3
Pre-Requisites:
CoRequisites:
Estimated required text and/or learning resource costs: Not available at this time.

Electives: Program Option - Technical Elective
Student must pass 1 Course(s), selected in the Student Portal from available course options

View Program Option Electives

Please note that all courses may not be offered in all semesters. Go to your student portal for full timetabling details under "My Courses".

Advanced Building Performance and Automation
ARCH74060

Hours: 42
Credits: 3
Pre-Requisites:
CoRequisites:
Estimated resource cost: No resources required

Artificial Intelligence
CNTR73150

Description:

Hours: 42
Credits: 3
Pre-Requisites: PROG71985 OR PROG72355
CoRequisites:
Estimated resource cost: No resources required

Finite Element Analysis
DSGN74045

Hours: 42
Credits: 3
Pre-Requisites: MATR72050
CoRequisites:
Estimated resource cost: No resources required

Value Engineering and Life Cycle Costing
ENGG74100

Hours: 42
Credits: 3
Pre-Requisites:
CoRequisites:
Estimated resource cost: No resources required

Operations Management
OPER73240

Hours: 42
Credits: 3
Pre-Requisites:
CoRequisites:
Estimated resource cost: No resources required

Electives: Major - Program Option 12
Student must pass 1 Course(s), selected in the Student Portal from available course options

View Program Option Electives

Please note that all courses may not be offered in all semesters. Go to your student portal for full timetabling details under "My Courses".

Metering, Building Performance Optimization & Data Analysis
ENGG74050

Description:

This course will provide an overview of the energy savings verification protocol most commonly used, the IPMVP (Introduction to Measurement and Verification) protocol. The students will develop an understanding of the methods used to conduct measurement and verification (M&V) on a building (or individual building systems), the central purpose of M&V, the calculations required for performance analysis and the accuracy limits, and the practical consideration and limitation of the M&V process. With this knowledge, the students will learn how to apply the M&V process to optimize building energy performance in real life applications.

Hours: 56
Credits: 4
Pre-Requisites:
CoRequisites:
Estimated resource cost: No resources required

Natural Channel Design
ENVR74010

Description:

This course teaches the principles of restoration and realignment of watercourses/channels to emulate their natural physical form. Topics will include assessment, natural erosion and deposition, ecological functions of the watercourse, and design principles

Hours: 56
Credits: 4
Pre-Requisites:
CoRequisites:
Estimated resource cost: No resources required

Electives: Major - Program Option 13
Student must pass 1 Course(s), selected in the Student Portal from available course options

View Program Option Electives

Please note that all courses may not be offered in all semesters. Go to your student portal for full timetabling details under "My Courses".

Project 4a - Commissioning & Controls
ENGG74060

Description:

This course will introduce the student to the process involved in the commissioning of buildings and retro-commissioning. The operation and maintenance of HVAC, electrical and elevating systems will be covered. Students will learn how to use building controls to evaluate the performance of building systems and their controls, and identify opportunities for optimizing energy use.

Hours: 70
Credits: 5
Pre-Requisites:
CoRequisites:
Estimated resource cost: No resources required

Project 4a - Water Modelling
ENVR74020

Description:

Hours: 70
Credits: 5
Pre-Requisites:
CoRequisites:
Estimated resource cost: No resources required

Level 11

Course details

Financial and Managerial Accounting
ACCT74100

Description:

Today’s technology employees need financial management skills to make decisions and manage projects within an organization. This introductory course for non-accounting students covers aspects of both financial accounting and management accounting. Students will be able to apply concepts of financial accounting to both personal and business situations, including the preparation and use of basic financial statements. Management accounting topics will allow the students to understand cost behaviour and its use in decision-making, evaluate capital investments, and prepare operating budgets.

Hours: 42
Credits: 3
Pre-Requisites:
CoRequisites:
Estimated required text and/or learning resource costs: Not available at this time.

Business Fundamentals
BUS71260

Description: This course will provide a starting point to understanding the functions of business and the role of engineers and engineering managers in the business environment. Economic systems and forms of business organization will be evaluated. The major functions of business (e.g. management, human resources, engineering, production, marketing and finance) will be examined in the Canadian environment and compared to the international environment. Special focus will be placed upon manufacturing-based businesses.

Hours: 42
Credits: 3
Pre-Requisites:
CoRequisites:
Estimated required text and/or learning resource costs: Not available at this time.

Infrastructure Asset Management
ENGG74070

Description:

This course enables students to define the term asset in infrastructure and buildings; outline the systematic process that businesses take in developing, operating, maintaining, upgrading, and disposing of assets in the most cost-effective manner; and discuss incorporating sustainability into asset decision making.

Hours: 42
Credits: 3
Pre-Requisites:
CoRequisites:
Estimated required text and/or learning resource costs: Not available at this time.

Project Management for Green Developments
ENVR74030

Description:

Managing the cost and schedule of a project is a core skill required for engineers. This course will provide an introduction to the principles and methodology of Project Management focused on green developments. Utilizing green development projects, the relationships amongst the various players of a project will be explored, focusing on the role of the Project Manager. Fundamental project management topics will be explored including: the green building industry, project participants, organizing and managing projects, project delivery methods, project chronology and related activates, estimating costs associated with incorporating sustainable solutions into construction projects, assessing performance based tradeoffs, incorporating performance improvements into designs, environmental legal and ethical requirements as they relate to sustainable building and construction and project scheduling.

Hours: 42
Credits: 3
Pre-Requisites:
CoRequisites:
Estimated required text and/or learning resource costs: Not available at this time.

Electives: Interdisciplinary
Student must pass 1 Course(s), selected in the Student Portal from available course options
Interdisciplinary Elective Details

Electives: Major - Program Option 14
Student must pass 1 Course(s), selected in the Student Portal from available course options

View Program Option Electives

Please note that all courses may not be offered in all semesters. Go to your student portal for full timetabling details under "My Courses".

Life Cycle Assessment & Carbon Analysis
CIVL74000

Description:

This course will teach students to calculate and assess the embodied impacts, including the lifetime environmental burdens from the building due to resource extraction, product manufacturing, construction, operation, maintenance, and eventual demolition, associated with the life cycle of a building. This course will include hands-on exercises using LCA software tools.

Hours: 42
Credits: 3
Pre-Requisites:
CoRequisites:
Estimated resource cost: No resources required

Land Development Process
CIVL74010

Description:

This course is focused on the land development process in a Canadian context. The land development process will be examined from the initial stages of site analysis through to regulatory approvals. Case studies will provide students with opportunity for active learning through the examination of real-world land development projects.

Hours: 42
Credits: 3
Pre-Requisites:
CoRequisites:
Estimated resource cost: No resources required

Electives: Program Option 15
Student must pass 1 Course(s), selected in the Student Portal from available course options

View Program Option Electives

Please note that all courses may not be offered in all semesters. Go to your student portal for full timetabling details under "My Courses".

Project 4b - Building Energy Simulation
ENGG74080

Description:

This course will provide an overview of energy simulations used to predict energy consumption in buildings and how to optimize the building design in order to lower energy usage and operational costs. Topics include: common myths about energy simulation, evaluating software and tools for accuracy, preparing models, gathering data to calibrate the model and optimizing the design for increased performance and energy conservation and current and future trends in the industry. Software will be evaluated and used as predictive tools.

Hours: 56
Credits: 4
Pre-Requisites:
CoRequisites:
Estimated resource cost: No resources required

Project 4b - Low Impact Design (LID) for Land Development
ENVR74040

Description:

Low impact development (LID) is an innovative stormwater management approach that treats, infiltrates, filters, and retains runoff at the source. This course covers the design, construction, and inspection of LID in various development applications. Instructors will take participants through each step of LID construction highlighting potential errors and explaining proper techniques.

Hours: 56
Credits: 4
Pre-Requisites:
CoRequisites:
Estimated resource cost: No resources required

Please note:

Estimated required text and/or learning resource costs are based on the most recent available data through the Conestoga Campus Store.

Program outcomes

Apply university level mathematics, natural sciences, and engineering fundamentals to solve engineering problems involving the sustainability of new and existing systems.
Apply critical thinking to identify, formulate, analyze, and solve complex engineering problems to reach substantiated conclusions that are supported by appropriate research.
Conduct investigations relating to natural science, civil, electrical and/or mechanical systems using methods that incorporate appropriate research and experiments, analysis and interpretation of data, and synthesis of information to reach substantiated conclusions.
Creatively transform ideas and concepts into robust engineering solutions that meet stakeholder/occupant requirements specifically considering health and safety risks, applicable standards and codes, and economic, environmental, cultural, and societal constraints.
Design, model, analyze, simulate, implement, and integrate sustainable engineering systems using concurrent design principles to realize solutions that conform to design specifications and stakeholder/occupant requirements, ensuring compatibility with current society and industry practices and future trends.
Create, select, adapt, and develop appropriate techniques, resources, and modern engineering tools for the design, analysis, simulation, evaluation, and implementation of sustainable systems and apply them appropriately, giving consideration to their associated limitations.
Apply concepts of human relations and organizational behaviour to establish and maintain effective relationships using leadership, interpersonal, group dynamics, and conflict resolution skills across diverse teams and groups.
Communicate complex engineering concepts within the profession and with society at large using oral, graphic, and print media methods to produce effective reports, design documentation, and instructions.
Interpret and adhere to professional, ethical, and legal codes of practice in compliance with industrial, labour, and environmental legislation to protect the public and public interest.
Apply the concepts of sustainability, environmental stewardship, and an awareness of societal impacts, including an appreciation for the interactions and uncertainties involved, to design and development activities.
Apply professional ethics, accountability, and equity to demonstrate value and respect of diversity across global and societal contexts.
Integrate engineering skills and knowledge with current business practices to manage risk and contractual obligations and provide economically sound engineering solutions.
Effectively manage enterprise resources through planning, organizing, staffing, directing, motivating, leading, monitoring and controlling.
Evaluate and address individual needs for continuing education and professional development to maintain technical and professional competence and to contribute to the advancement of knowledge.