Applying as a Canadian applicant
Campus tours
Campus tours are one of the best ways to experience Conestoga. During this time, we are offering online guided tours to show you all Conestoga has to offer.
Book your tourVirtual tours
If you can't make an on-campus tour or attend one of our events, the virtual tour is a great way to visit us.
View our Virtual tourCourses - January 2027
Level 1
Course details
College Reading & Writing Across Contexts
COMM1085
This course explores the intersections of reading, writing, and critical thinking with an emphasis on academic and workplace competencies for the 21st century. Through regular reading, writing, and discussion, students will develop the ability to analyze texts, construct well-supported arguments, and express their ideas effectively by learning to meet the expectations of selected audiences, purposes, and contexts. The course also provides a foundation for understanding the complexities of research, information literacy, and ethical communication in relation to various contemporary social and cultural issues.
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
- Estimated required text and/or learning resource costs: No cost.
Conestoga 101
CON0101
- Hours: 1
- Credits: 0
- Pre-Requisites:
- CoRequisites:
- Estimated required text and/or learning resource costs: No cost.
Prints and Standards I
ELEC1060
This course will introduce the student to the Canadian Electrical Code (CEC) with emphasis on the arrangement of the code book, code definitions, and interpretation of the rules. Several general sections of the code book will be examined in detail. Learners will develop the skills necessary to read a set if prints and interpret specifications for a single-family dwelling and apply applicable code rules.
- Hours: 70
- Credits: 4
- Pre-Requisites:
- CoRequisites:
- Estimated required text and/or learning resource costs: $410.90
Electrical Theory I
ELEC1340
The student will get a comprehensive overview of electrical fundamentals. Electron theory, voltage, current, and resistance are studied as well as electrical and mechanical energy. The student will develop, assemble, analyze, measure and perform calculations for series, parallel, combination, and electronic direct current (DC) circuits using Ohm's and Kirchhoff's Laws. Students will analyze common methods of producing electricity. This course examines magnetism including associated laws and calculations. This course will also cover the theory and principles of operation of various electronic devices and semiconductor materials.
- Hours: 84
- Credits: 6
- Pre-Requisites:
- CoRequisites:
- Estimated required text and/or learning resource costs: $247.25
Residential Installations
ELEC1355
The student will develop the skills to install, test, troubleshoot and verify the operation of common residential branch circuits in accordance with industry standards and the Canadian Electrical Code. The learner will use materials and equipment found in typical wiring of residential occupancies. Ladder, layout and wiring diagrams will be developed following program and industry standards.
- Hours: 56
- Credits: 3
- Pre-Requisites:
- CoRequisites:
- Estimated required text and/or learning resource costs: No cost.
Electrical Controls I
ELEC1385
This course will provide the student with experience in basic electrical control strategies and common pilot devices such as push buttons, selector switches, indicator lights and alarms. Relays and their functions in control circuits will also be examined. The learner will develop, construct, test, troubleshoot, and commission basic control circuits. Ladder and wiring diagrams will be developed to trade and program standards
- Hours: 56
- Credits: 3
- Pre-Requisites:
- CoRequisites:
- Estimated required text and/or learning resource costs: No cost.
Level 2
Course details
Prints and Standards II
ELEC1365
This course will introduce the student to the Canadian Electrical Code (CEC) with emphasis on the arrangement of the code book, code definitions, and interpretation of the rules. Several general sections of the code book will be examined in detail. Learners will develop the skills necessary to read a set if prints and interpret specifications for a single-family dwelling and apply applicable code rules.
- Hours: 56
- Credits: 4
- Pre-Requisites: ELEC1060 OR ELEC1061
- CoRequisites:
- Estimated required text and/or learning resource costs: Not available at this time.
Electrical Theory II
ELEC1375
The student will study the fundamentals of alternating current (AC) theory including the development of a sine wave with respect to voltage, current, and power. The student will analyze the operation and control of AC devices and equipment. Characteristics of resistance, inductance and capacitance and their effects on AC circuitry will be examined. The student will develop, create, analyze and troubleshoot circuits using test equipment such as meters and oscilloscopes. Electronic circuits used in the electrical industry and common circuits will be examined.
- Hours: 84
- Credits: 5
- Pre-Requisites: ELEC1340
- CoRequisites:
- Estimated required text and/or learning resource costs: Not available at this time.
Wiring Methods
ELEC1695
The student will explore various installation methods used in residential, commercial, and industrial environments. Strategies and techniques will be developed to ensure mechanical and electrical integrity is maintained in the installation of various types of cables and raceways. Students will be evaluated to ensure the installation is compliant to all applicable codes and standards.
- Hours: 56
- Credits: 3
- Pre-Requisites: ELEC1350 OR ELEC1355
- CoRequisites:
- Estimated required text and/or learning resource costs: Not available at this time.
Electrical Controls II
ELEC1900
The student will build on the foundations learned in Electrical Controls I to develop, construct, test, troubleshoot and commission various motor control circuits. Functions such as starting, stopping and reversing various types of motors of will be examined. Schematic and wiring diagrams will be developed to trade and program standards.
- Hours: 56
- Credits: 3
- Pre-Requisites: ELEC1385
- CoRequisites:
- Estimated required text and/or learning resource costs: Not available at this time.
Instrumentation
INST1050
In this course students will study the application and integration of a variety of instruments used to measure Temperature, Level, Pressure and Flow. Various instrumentation equipment will be analyzed with respect to 4 - 20 mA current loops. Students will work with SI and Imperial measurement systems, develop simple instrumentation diagrams, and interpret manufacturers' documentation.
- Hours: 42
- Credits: 4
- Pre-Requisites:
- CoRequisites:
- Estimated required text and/or learning resource costs: Not available at this time.
Level 3
Course details
Electrical Controls III
ELEC1393
- Hours: 42
- Credits: 3
- Pre-Requisites: ELEC1900
- CoRequisites:
- Estimated required text and/or learning resource costs: No cost.
Prints and Standards III
ELEC2305
Canadian Electrical Code (CEC) rules and industry standards will be interpreted as they pertain to service, feeder, and branch circuit installations for common commercial building applications. Blueprints and specifications will be used to determine equipment ratings and wiring methods for lighting and power circuits.
- Hours: 56
- Credits: 4
- Pre-Requisites: ELEC1365
- CoRequisites:
- Estimated required text and/or learning resource costs: Not available at this time.
Electrical Theory III
ELEC2310
This course follows Electrical Theory II and expands on circuits with resistive, inductive and/or capacitive components as they relate to power factor calculations and power factor correction. The construction, design, and principles of operation of induction motors and single-phase transformers will be studied. Electrical generation, storage, and alternate energy systems will be designed, compared, and connected.
- Hours: 70
- Credits: 5
- Pre-Requisites: ELEC1375 OR ELEC1376
- CoRequisites:
- Estimated required text and/or learning resource costs: No cost.
Commercial Circuits
ELEC3185
In this practical course the student is required to install, connect, and troubleshoot various types of building systems such as security, automation, communication and distribution. The theory of operation of fire alarm systems and associated equipment will be studied. The student will demonstrate the ability to develop schematic and wiring diagrams from material data sheets and manufacturers' literature.
- Hours: 56
- Credits: 3
- Pre-Requisites:
- CoRequisites:
- Estimated required text and/or learning resource costs: No cost.
PLC
ELEC3190
This course introduces the student to the application and programming of various Programmable Logic Controllers (PLC). Students will demonstrate the ability to configure and address the PLC, input and troubleshoot various operations including: sequencing, timers, counters, and other functions. Learners will also demonstrate the ability to test PLC inputs and outputs, as well as identify methods of hard wiring PLC’s to equipment.
- Hours: 56
- Credits: 4
- Pre-Requisites:
- CoRequisites:
- Estimated required text and/or learning resource costs: No cost.
Student must pass one course, selected in the Student Portal from available course options.
Level 4
Course details
Prints and Standards IV
ELEC2325
Canadian Electrical Code (CEC) rules and industry standards, blueprints, and specifications will be interpreted as they pertain to service, feeder, and branch circuits used in common industrial and institutional applications. Various types of diagrams used in industry will be developed and implemented for single-phase and three-phase lighting and power distribution systems.
- Hours: 42
- Credits: 4
- Pre-Requisites: ELEC2300 OR ELEC2305
- CoRequisites:
- Estimated required text and/or learning resource costs: Not available at this time.
Electrical Theory IV
ELEC2330
This course follows Electrical Theory III expanding on RLC circuits as they pertain to 3-phase power and power factor correction. The construction, design, and principles of operation of various types of transformers, alternating current, motors and alternators are also studied in this course. Students will identify and connect various types of single-phase and three-phase transformer configurations, to feed various types of circuits. Alternative energy sources will be expanded on and sized in accordance with industry standards.
- Hours: 84
- Credits: 5
- Pre-Requisites: ELEC2310
- CoRequisites:
- Estimated required text and/or learning resource costs: No cost.
Automation Principles
ELEC2355
This project based course will showcase skillsets and knowledge obtained throughout the program. It will use relay logic functions to interface with and control various devices used in industrial automation. Students will incorporate the use of various types of field devices and process control techniques, as well as variable frequency drives (VFD's) to control three-phase induction motors. Students will develop PLC programs using a variety of manufacturers software and PLC languages. The students will integrate a variety of industrial automation concepts in a semester long project that will culminate into a practical working application.
- Hours: 112
- Credits: 6
- Pre-Requisites: ELCN1060 OR ELCN1061 AND ELEC1060 AND ELEC1393 AND ELEC1395 OR ELEC1397 OR ELEC1900 AND ELEC2300 OR ELEC2305 AND ELEC2310 AND ELEC3180 OR ELEC3185 AND ELEC3190 AND INST1050
- CoRequisites:
- Estimated required text and/or learning resource costs: No cost.
Student must pass one course, selected in the Student Portal from available course options.
Level 1
Course details
College Reading & Writing Across Contexts
COMM1085
This course explores the intersections of reading, writing, and critical thinking with an emphasis on academic and workplace competencies for the 21st century. Through regular reading, writing, and discussion, students will develop the ability to analyze texts, construct well-supported arguments, and express their ideas effectively by learning to meet the expectations of selected audiences, purposes, and contexts. The course also provides a foundation for understanding the complexities of research, information literacy, and ethical communication in relation to various contemporary social and cultural issues.
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
- Estimated required text and/or learning resource costs: No cost.
Conestoga 101
CON0101
- Hours: 1
- Credits: 0
- Pre-Requisites:
- CoRequisites:
- Estimated required text and/or learning resource costs: No cost.
Prints and Standards I
ELEC1060
This course will introduce the student to the Canadian Electrical Code (CEC) with emphasis on the arrangement of the code book, code definitions, and interpretation of the rules. Several general sections of the code book will be examined in detail. Learners will develop the skills necessary to read a set if prints and interpret specifications for a single-family dwelling and apply applicable code rules.
- Hours: 70
- Credits: 4
- Pre-Requisites:
- CoRequisites:
- Estimated required text and/or learning resource costs: $410.90
Electrical Theory I
ELEC1340
The student will get a comprehensive overview of electrical fundamentals. Electron theory, voltage, current, and resistance are studied as well as electrical and mechanical energy. The student will develop, assemble, analyze, measure and perform calculations for series, parallel, combination, and electronic direct current (DC) circuits using Ohm's and Kirchhoff's Laws. Students will analyze common methods of producing electricity. This course examines magnetism including associated laws and calculations. This course will also cover the theory and principles of operation of various electronic devices and semiconductor materials.
- Hours: 84
- Credits: 6
- Pre-Requisites:
- CoRequisites:
- Estimated required text and/or learning resource costs: $247.25
Residential Installations
ELEC1355
The student will develop the skills to install, test, troubleshoot and verify the operation of common residential branch circuits in accordance with industry standards and the Canadian Electrical Code. The learner will use materials and equipment found in typical wiring of residential occupancies. Ladder, layout and wiring diagrams will be developed following program and industry standards.
- Hours: 56
- Credits: 3
- Pre-Requisites:
- CoRequisites:
- Estimated required text and/or learning resource costs: No cost.
Electrical Controls I
ELEC1385
This course will provide the student with experience in basic electrical control strategies and common pilot devices such as push buttons, selector switches, indicator lights and alarms. Relays and their functions in control circuits will also be examined. The learner will develop, construct, test, troubleshoot, and commission basic control circuits. Ladder and wiring diagrams will be developed to trade and program standards
- Hours: 56
- Credits: 3
- Pre-Requisites:
- CoRequisites:
- Estimated required text and/or learning resource costs: No cost.
Level 2
Course details
Co-op and Career Preparation
CEPR1020
- Hours: 14
- Credits: 1
- Pre-Requisites:
- CoRequisites:
- Estimated required text and/or learning resource costs: No cost.
Prints and Standards II
ELEC1365
This course will introduce the student to the Canadian Electrical Code (CEC) with emphasis on the arrangement of the code book, code definitions, and interpretation of the rules. Several general sections of the code book will be examined in detail. Learners will develop the skills necessary to read a set if prints and interpret specifications for a single-family dwelling and apply applicable code rules.
- Hours: 56
- Credits: 4
- Pre-Requisites: ELEC1060 OR ELEC1061
- CoRequisites:
- Estimated required text and/or learning resource costs: Not available at this time.
Electrical Theory II
ELEC1375
The student will study the fundamentals of alternating current (AC) theory including the development of a sine wave with respect to voltage, current, and power. The student will analyze the operation and control of AC devices and equipment. Characteristics of resistance, inductance and capacitance and their effects on AC circuitry will be examined. The student will develop, create, analyze and troubleshoot circuits using test equipment such as meters and oscilloscopes. Electronic circuits used in the electrical industry and common circuits will be examined.
- Hours: 84
- Credits: 5
- Pre-Requisites: ELEC1340
- CoRequisites:
- Estimated required text and/or learning resource costs: Not available at this time.
Wiring Methods
ELEC1695
The student will explore various installation methods used in residential, commercial, and industrial environments. Strategies and techniques will be developed to ensure mechanical and electrical integrity is maintained in the installation of various types of cables and raceways. Students will be evaluated to ensure the installation is compliant to all applicable codes and standards.
- Hours: 56
- Credits: 3
- Pre-Requisites: ELEC1350 OR ELEC1355
- CoRequisites:
- Estimated required text and/or learning resource costs: Not available at this time.
Electrical Controls II
ELEC1900
The student will build on the foundations learned in Electrical Controls I to develop, construct, test, troubleshoot and commission various motor control circuits. Functions such as starting, stopping and reversing various types of motors of will be examined. Schematic and wiring diagrams will be developed to trade and program standards.
- Hours: 56
- Credits: 3
- Pre-Requisites: ELEC1385
- CoRequisites:
- Estimated required text and/or learning resource costs: Not available at this time.
Instrumentation
INST1050
In this course students will study the application and integration of a variety of instruments used to measure Temperature, Level, Pressure and Flow. Various instrumentation equipment will be analyzed with respect to 4 - 20 mA current loops. Students will work with SI and Imperial measurement systems, develop simple instrumentation diagrams, and interpret manufacturers' documentation.
- Hours: 42
- Credits: 4
- Pre-Requisites:
- CoRequisites:
- Estimated required text and/or learning resource costs: Not available at this time.
Level 3
Course details
Co-op Work Term I (Electrical Technician - Industrial)
COOP2325
- Hours: 420
- Credits: 14
- Pre-Requisites: CDEV1020 OR CEPR1020
- CoRequisites:
- Estimated required text and/or learning resource costs: Not available at this time.
Level 4
Course details
Co-op Work Term II (Electrical Technician - Industrial)
COOP2335
- Hours: 420
- Credits: 14
- Pre-Requisites: CDEV1020 OR CEPR1020
- CoRequisites:
- Estimated required text and/or learning resource costs: No cost.
Level 5
Course details
Electrical Controls III
ELEC1393
- Hours: 42
- Credits: 3
- Pre-Requisites: ELEC1900
- CoRequisites:
- Estimated required text and/or learning resource costs: No cost.
Prints and Standards III
ELEC2305
Canadian Electrical Code (CEC) rules and industry standards will be interpreted as they pertain to service, feeder, and branch circuit installations for common commercial building applications. Blueprints and specifications will be used to determine equipment ratings and wiring methods for lighting and power circuits.
- Hours: 56
- Credits: 4
- Pre-Requisites: ELEC1365
- CoRequisites:
- Estimated required text and/or learning resource costs: Not available at this time.
Electrical Theory III
ELEC2310
This course follows Electrical Theory II and expands on circuits with resistive, inductive and/or capacitive components as they relate to power factor calculations and power factor correction. The construction, design, and principles of operation of induction motors and single-phase transformers will be studied. Electrical generation, storage, and alternate energy systems will be designed, compared, and connected.
- Hours: 70
- Credits: 5
- Pre-Requisites: ELEC1375 OR ELEC1376
- CoRequisites:
- Estimated required text and/or learning resource costs: No cost.
Commercial Circuits
ELEC3185
In this practical course the student is required to install, connect, and troubleshoot various types of building systems such as security, automation, communication and distribution. The theory of operation of fire alarm systems and associated equipment will be studied. The student will demonstrate the ability to develop schematic and wiring diagrams from material data sheets and manufacturers' literature.
- Hours: 56
- Credits: 3
- Pre-Requisites:
- CoRequisites:
- Estimated required text and/or learning resource costs: No cost.
PLC
ELEC3190
This course introduces the student to the application and programming of various Programmable Logic Controllers (PLC). Students will demonstrate the ability to configure and address the PLC, input and troubleshoot various operations including: sequencing, timers, counters, and other functions. Learners will also demonstrate the ability to test PLC inputs and outputs, as well as identify methods of hard wiring PLC’s to equipment.
- Hours: 56
- Credits: 4
- Pre-Requisites:
- CoRequisites:
- Estimated required text and/or learning resource costs: No cost.
Student must pass one course, selected in the Student Portal from available course options.
Level 6
Course details
Co-op Work Term III (Electrical Technician - Industrial)
COOP2345
- Hours: 420
- Credits: 14
- Pre-Requisites: CDEV1020 OR CEPR1020
- CoRequisites:
- Estimated required text and/or learning resource costs: Not available at this time.
Prints and Standards IV
ELEC2325
Canadian Electrical Code (CEC) rules and industry standards, blueprints, and specifications will be interpreted as they pertain to service, feeder, and branch circuits used in common industrial and institutional applications. Various types of diagrams used in industry will be developed and implemented for single-phase and three-phase lighting and power distribution systems.
- Hours: 42
- Credits: 4
- Pre-Requisites: ELEC2300 OR ELEC2305
- CoRequisites:
- Estimated required text and/or learning resource costs: Not available at this time.
Electrical Theory IV
ELEC2330
This course follows Electrical Theory III expanding on RLC circuits as they pertain to 3-phase power and power factor correction. The construction, design, and principles of operation of various types of transformers, alternating current, motors and alternators are also studied in this course. Students will identify and connect various types of single-phase and three-phase transformer configurations, to feed various types of circuits. Alternative energy sources will be expanded on and sized in accordance with industry standards.
- Hours: 84
- Credits: 5
- Pre-Requisites: ELEC2310
- CoRequisites:
- Estimated required text and/or learning resource costs: No cost.
Automation Principles
ELEC2355
This project based course will showcase skillsets and knowledge obtained throughout the program. It will use relay logic functions to interface with and control various devices used in industrial automation. Students will incorporate the use of various types of field devices and process control techniques, as well as variable frequency drives (VFD's) to control three-phase induction motors. Students will develop PLC programs using a variety of manufacturers software and PLC languages. The students will integrate a variety of industrial automation concepts in a semester long project that will culminate into a practical working application.
- Hours: 112
- Credits: 6
- Pre-Requisites: ELCN1060 OR ELCN1061 AND ELEC1060 AND ELEC1393 AND ELEC1395 OR ELEC1397 OR ELEC1900 AND ELEC2300 OR ELEC2305 AND ELEC2310 AND ELEC3180 OR ELEC3185 AND ELEC3190 AND INST1050
- CoRequisites:
- Estimated required text and/or learning resource costs: No cost.
Student must pass one course, selected in the Student Portal from available course options.
Please note:
Estimated required text and/or learning resource costs are based on the most recent available data through the Conestoga Campus Store.
Program outcomes
- Interpret and produce electrical and electronics drawings including other related documents and graphics.
- Analyze and solve routine technical problems related to electrical systems by applying mathematics and science principles.
- Use, verify, and maintain instrumentation equipment and systems.
- Assemble, test, modify and maintain electrical circuits and equipment to fulfill requirements and specifications under the supervision of a qualified person.
- Install and troubleshoot static and rotating electrical machines and associated control systems under the supervision of a qualified person.
- Verify acceptable functionality and apply troubleshooting techniques for electrical and electronic circuits, components, equipment, and systems under the supervision of a qualified person.
- Analyze, assemble and troubleshoot control systems under the supervision of a qualified person.
- Use computer skills and tools to solve routine electrical related problems.
- Assist in creating and conducting quality assurance procedures under the supervision of a qualified person.
- Prepare and maintain records and documentation systems.
- Install, test and troubleshoot telecommunication systems under the supervision of a qualified person.
- Apply health and safety standards and best practices to workplaces.
- Perform tasks in accordance with relevant legislation, policies, procedures, standards, regulations, and ethical principles.
- Configure installation and apply electrical cabling requirements and system grounding and bonding requirements for a variety of applications under the supervision of a qualified person.
- Assist in commissioning, testing and troubleshooting electrical power systems under the supervision of a qualified person.
- Select electrical equipment, systems and components to fulfill the requirements and specifications under the supervision of a qualified person.
- Apply project management principles to assist in the implementation of projects.